{
 "after_text": "For high-risk AI systems covered by the Union harmonisation legislation listed in Section A of Annex I, the provider of the system shall follow the relevant conformity assessment procedure as required in accordance with the relevant Union harmonisation legislation. The requirements set out in Section 2 of this Chapter shall apply to those high-risk AI systems and shall be part of that assessment. Assessment of the quality management system set out in Article 17 shall also be undertaken, and points 3, 4.3, 4.4. and 4.5, the fifth paragraph of point 4.6 and point 5 of Annex VII shall apply. For the purposes of that conformity assessment, notified bodies which have been notified under the Union harmonisation legislation listed in Section A of Annex I shall have the power to assess the conformity of high-risk AI systems with the requirements set out in Section 2 of this Chapter, provided that the compliance of those notified bodies with the requirements laid down in Article 31(4), (5), (10) and (11) has been assessed in the context of the notification procedure in accordance with the relevant Union harmonisation legislation, which is evidenced through the assessment as part of the existing notification. Without prejudice to Article 28, such notified bodies which have been notified under the Union harmonisation legislation in Section A of Annex I, shall apply for designation in accordance with Section 4 of this Chapter by 28 January 2028. Where Union harmonisation legislation listed in Section A of Annex I provides the product manufacturer with an option to rely on a conformity assessment that does not involve a third-party, provided that that manufacturer has applied harmonised standards to ensure compliance with all the relevant requirements, that manufacturer may use that option only if it has also applied harmonised standards or, where applicable, common specifications referred to in Article 41, covering all requirements set out in Section 2 of this Chapter. The classification of a product as a high-risk AI system in accordance with Article 6(1) does not affect the choice of the conformity assessment procedure provided to the manufacturers of products covered by Union harmonisation legislation listed in Section A of Annex I, including, where applicable, an option to rely on harmonised standards. The manufacturers of such products are not required to choose a conformity assessment procedure involving third-party conformity assessment only because the product includes a high-risk AI system as a safety component, if this is not required by the Union harmonisation legislation listed in Section A of Annex I. Where a high-risk AI system is both covered by the Union harmonisation legislation listed in Section A of Annex I and it falls within one of the categories listed in Annex III, the provider of that system shall follow the relevant conformity assessment procedure as required pursuant to the relevant Union harmonisation legislation listed in Section A of Annex I.",
 "before_text": "3. For high-risk AI systems covered by the Union harmonisation legislation listed in Section A of Annex I, the provider shall follow the relevant conformity assessment procedure as required under those legal acts. The requirements set out in Section 2 of this Chapter shall apply to those high-risk AI systems and shall be part of that assessment. Points 4.3., 4.4., 4.5. and the fifth paragraph of point 4.6 of Annex VII shall also apply. For the purposes of that assessment, notified bodies which have been notified under those legal acts shall be entitled to control the conformity of the high-risk AI systems with the requirements set out in Section 2, provided that the compliance of those notified bodies with requirements laid down in Article 31(4), (5), (10) and (11) has been assessed in the context of the notification procedure under those legal acts. Where a legal act listed in Section A of Annex I enables the product manufacturer to opt out from a third-party conformity assessment, provided that that manufacturer has applied all harmonised standards covering all the relevant requirements, that manufacturer may use that option only if it has also applied harmonised standards or, where applicable, common specifications referred to in Article 41, covering all requirements set out in Section 2 of this Chapter.",
 "composed_from": [
  "eu-2024-1689/art_043/par_003@v1",
  "eu-2026-1744/art_001/pt_019"
 ],
 "id": "eu-2024-1689/art_043/par_003",
 "instructions": [
  {
   "celex": "32026R1744",
   "derivation_page": "/derivations/art_001__pt_019.html",
   "id": "eu-2026-1744/art_001/pt_019",
   "instruction_text": "in Article 43, paragraph 3 is replaced by the following:",
   "level": "paragraph",
   "op": "replace",
   "payload_xml_sha256": "41de8ee1b6eea88318f66475160ef935665c55a578b262ce81d96c25b2a82cce",
   "source_member": "L_202601744EN.000101.fmx.xml"
  }
 ],
 "review_status": "not-reviewed",
 "status": "current",
 "valid_from": "2026-07-27"
}